Publicité
Les langues disponibles
Les langues disponibles
•
The microwave is for built-in use only. It must be
placed on a stable and flat surface.
•
The cabinet can not have a back wall in the
place where the microwave is located.
•
Put the microwave far away from steam, hot air
and water splashes.
•
If the microwave is too close to a radio or TV set
it may cause interference in the received signal.
•
If you transport the microwave in the cold
weather, do not activate it immediately after the
installation. Let is stand in the room temperature
and absorb the heat.
ELECTRICAL INSTALLATION
WARNING! Only a qualified person
must do the electrical installation.
The manufacturer is not responsible if
you do not follow the safety
precautions from the chapter "Safety
Information".
This microwave is supplied with a main cable and
main plug.
The cable has an earth wire with an earthing plug.
The plug must be plugged into an outlet that is
properly installed and earthed. In the event of an
electrical short circuit, earthing reduces the risk of
electric shock.
INSTALLING THE MICROWAVE
1. Check if the dimensions of the furniture meet
the installation distances.
C
D
A
B
Installation distances
Dimension
A
B
C
D
E
F
2. Put the template on the bottom of cabinet and
check if it fits. If yes, mark the spots for screws.
Remove the template and fix the bracket with
the screws (A) in the marked spot.
A
3. Install the microwave. If you fixed the bracket,
make sure it locks the back of the appliance.
E
F
mm
450 + 2
560 + 8
550
45
5
5
=
=
23
Publicité
