BRAND accu-jet S Mode D'emploi page 58

5 Pipetting
3. Setting the volume
3.
4. Emptying the pipette
a. Press the lower pipetting button slowly. The pipetting speed depends
on how far the pipetting buttons have been pressed in. In the "Blow-
out with motor support" operating mode, the speed also depends on
the set motor speed.
5. After pipetting
a. Grip the pipette as high up as possible, and pull it out of the adapter.
Operating manual
58
-
+
- +
Do not overfill the pipette.
a. If necessary, wipe the tip of the
pipette with a suitable lint-free cloth.
b. Press the lower pipetting button
slowly and dispense liquid until the
meniscus is adjusted exactly to the
desired volume.
NOTICE
997418