BRAND accu-jet S Mode D'emploi page 59

6 Cleaning
accu-jet® S is not autoclavable
Occasionally clean the housing parts with a damp cloth. When used
properly, the instrument is maintenance-free.
6.1 Check tightness
6.2 Replace filter and clean adapter
Risk of contamination and infection
Wear protective gloves and goggles.
Filter replacement or cleaning is only necessary if a pipette has been
overfilled or the suction capacity is impaired.
997418
+
-
NOTICE
After adjusting the meniscus, no liquid
should drip from the pipette without
operating the valves. If the pipette is
dripping, see Troubleshooting
WARNING
NOTICE
Operating manual
59