BRAND accu-jet S Mode D'emploi page 53

e.
e. Insert the top case. While doing so, make sure that the housing
engages in the designated slots above the adjustment wheel (1) and
in the screw connection of the adapter housing (2).
f. Press the upper housing section into the housing shells and screw on
the adapter housing.
g. Insert the power supply plug into the handle.
h. Charge the battery until the LED charge indicator is flashing green.
Charging time is approx. 4 hours, see Charging the battery.
4.2 Charging the battery
Damaged power adapter or charging cable
Risk of injury due to electric shock.
>
Do not use a damaged power adapter.
>
If the charging cable is damaged, do not use the power
adapter.
997418
2
WARNING
1
Operating manual
53