BRAND accu-jet S Mode D'emploi page 55

4.3 Turning on the instrument
The instrument is ready for operation when a charged battery is inserted.
There is no ON/OFF switch.
4.4 Selecting the operating mode
Selection switch, see Functional and operating elements, p. 49 .
"Gravity delivery" operating mode: slide the selection switch upward.
"Blow-out with motor support" operating mode: slide the selection
switch downward.
4.5 Aspirating or dispensing liquid
Pipetting button, see Functional and operating elements, p. 49
To fill the pipette, press the upper pipetting button; to dispense, press the
lower pipetting button.
4.6 Changing the pipetting speed
The speed is limited by the maximum motor speed set. The further the
upper and lower pipetting buttons are pressed in, the faster the
instrument aspirates or dispenses liquid.
4.7 Setting the motor speed
Adjustment wheel, see Functional and operating elements, p. 49
The motor speed can be infinitely adjusted from maximum (+) to
minimum (-) by turning the adjustment wheel. We recommend using the
maximum motor speed for large volume pipettes and a lower motor
speed for small volume pipettes.
997418 Operating manual
55