BRAND accu-jet S Mode D'emploi page 57

5 Pipetting
1. Attaching the pipette
Ensure that the pipette is firmly in place. Never use force!
Especially with thin pipettes, there is a risk of glass breakage!
Risk of injury!
1.
2. Filling the pipette
2.
997418
WARNING
a. Always hold the pipette as close as
- +
b. Always hold the instrument with the
a. Immerse pipette tip into the test
+
-
b. Press the upper pipetting button
c. You can aspirate or dispense liquid
possible to the upper end and push it
carefully into the adapter until it is
firmly in place.
pipette inserted vertically, tip down.
liquid.
slowly and fill the pipette so that the
meniscus lies slightly above the
desired marks.
with greater precision by pressing
both pipetting buttons. This is
particularly helpful when adjusting
the meniscus or when using small
volume pipettes.
Operating manual
57