FIT BIKE RIDE 8 IPLUS TFT Mode D'emploi page 29

Choices on page
one.
Choices on page two.
When touch the option "USER PROGRAM", the Pre-set
training programs will appear.
DAt this time, the user can set the following requirements
that the user want to change.
Touch the – or + icon to adjust resistance
settings (LOAD1 – LOAD16).
Touch the < or > icon to adjust each resistance bar
settings (total is 20 resistances bars).
Touch the SAVE icon to save the setting for
training programs.
Click the EXIT icon to exit this "USER PROGRAM".
Choices on page three.
26