General Features - Cembre HT51L-KV Notice D'utilisation Et Entretien

ENGLISH
ITALIANO

1. GENERAL FEATURES

TOOL TYPE:
Application range: suitable for installing electrical compression connectors
Crimping force kN (tons):
Rated operating pressure bar (psi):
Weight (without dies) kg (lbs):
Recommended oil:
SHELL TELLUS TX 32
Advancing speed:
Safety:
the tool is provided with a maximum pressure valve:
MPC1 gauge is available for checking the crimping force.
Dimensions mm (inches):
406 (16)
FIG. 2
2. INSTRUCTIONS FOR USE
2.1) Setting
(Refer to Figs. 3 and 4)
HT51L tools are equipped with upper (20) and lower (19) adaptors which reproduce the
"D3" imprint; "W" type dies can be inserted into these adaptors as follows:
– Select the appropriate "W" die set for the connector.
– Open the latch (21) and release the upper die holder (22).
– Press pins (90) and insert one "W" die into the upper adaptor (20) and the other into the
lower adaptor (19).
– Close the holder (22) and lock it correctly with the latch (21).
HT 51L HT 51L-KV
for conductors up to 240 mm 2 (500 MCM)
50 ( 6 )
600 ( 8,600 )
2,7 (6.2)
AGIP ARNICA 32 or
AGIP ITE 360 or
ESSO TRANSFORMER P60
or equivalent
or equivalent
the tool has two forward speeds and automatically
switches from a fast die advancement speed to a
slower crimping speed.
FIG. 5
Cembre dies
Matrices Cembre
Cembre Presseinsätze
Matrices Cembre
Matrici Cembre
FIG. 6
3 28
19
20
A
22
AU50L-50-S
A
22
21
1
2
90
"A"
21
90
1
2
"A"
18