Table des Matières
Publicité
ENGLISH
BATTERY OPERATED HYDRAULIC CRIMPING TOOL
B35-50 ; B35-50A
16
1. GENERAL CHARACTERISTICS
TOOL TYPE:
Application range:
suitable for installing electrical compression connectors
Crimping force
kN (sh ton):
Rated operating pressure bar (psi):
Dimensions LxWxH
mm (inches):
Weight with battery
kg (lbs):
67
Motor
Volt DC:
16
Battery type CB9620H
Volt / Ah:
Battery charger supply
Volt / Hz:
350
Recommended oil:
AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent.
Safety:
600
Operating temperature:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
is equal to ............................................................................ 66,8 dB (A)
pA
– The maximum value of the weighted acoustic displacement
25
pressure C at the work place L
is ................................................................... < 130 dB (C)
pCPeak
– The acoustic power level emitted by the machine
26
L
is equal to ........................................................................................................... 75 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1).
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1
Standards, and under operating conditions much more severe than those normally found,
st
certify that the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec
The part references "B35-50 ; B35-50A" include the following:
24
– Basic tool complete with battery
– Spare battery
58
23
– Battery charger complete with CBA96-144 adapter
– Plastic carrying case VAL P22
20
The tool can be held in one hand while positioning the connector with the other.
It is equipped with automatic return of the dies once the crimping operation is completed.
22
Residual battery capacity level is automatically displayed after every cycle.
4
68
15
3
B35-50
B35-50A
4
for conductors up to 150 mm
(300 MCM)
2
2
35 (4)
1
65
390 (5,600)
372 x 108 x 66 (14,6 x 4.17 x 2.6)
320
2.4 (5.3)
*
64
72
9.6
9.6 / 2.0 Ni-MH
75
220 - 240 / 50 - 60
120 / 50 - 60
65
67
66
the tool is equipped with a maximum pressure valve.
-15°C to +40°C (+5°F to +104°F)
360
71
70
28
59
27
21
42
.
2
1
34
69
24
26
31
18
19
8
30
27
17
310
62
77
63
57
45
500
57
18
3
32
TABLE 2 - TABLEAU 2 - TABELLE 2
4
19
18
10
9
11
210
7
8
6
9
11
220
17
21
400
15
17
300
- TABLA 2 - TAVOLA 2
100
1
250
16
20
15
TIGHTENING TORQUE
COUPLE DE SERRAGE
DREHMOMENT
PAR DE TORSION
COPPIA DI SERRAGGIO
8 Nm (5.9 lbf ft)
*
Publicité
Table des Matières
