Parkside PAAP 12 B2 Traduction Des Instructions D'origine page 21

Polishing discs (included in scope of
delivery)
Max. permitted speed
n ..........................max. 12000 min
max
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAPK 12 A1, PAPK 12 A2, PAPK 12 B1,
PAPK 12 B2.
This type of battery may only be charged
with the following chargers: PLGK 12 A1,
PLGK 12 A2, PLGK 12 B2.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are limiting the working
hours. For this purpose all parts of
the operating cycle have to be con-
sidered (for example, times when
the electric tool is switched off and
times when it is switched on but
running without any load).
Safety instructions
Ensure that the safety instructions are ob-
served when operating the appliance.
-1
Symbols and icons
Symbols on the appliance:
Carefully read these operating in-
structions
.
Warning! Always wear safety gog-
gles
This device is part of the Park-
side X 12 V TEAM series
Electrical appliances must not be
disposed of with the domestic waste.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
GB IE
21