Pulsar HELION XQ19F Instructions D'utilisation page 9

Menu contents and description
Wi-Fi
Wi-Fi ON/OFF
Turn Wi-Fi on with a short press of the M (9) button.
Off
Turn Wi-Fi off with a short press of the M (9) button.
The devices have four operating modes of the
thermal imager: Forest (observation mode of
Mode
objects within low thermal contrast conditions),
Rocks (observation mode of objects within high
thermal contrast conditions), Identification (high
detalization mode), User (individual brightness and
contrast settings).
Press and hold the Menu button to enter the
=
menu.
Select the 'Mode' option.
=
A short press of the Menu button opens the menu.
=
Select one of the settings described below with
=
the UP / DOWN buttons.
A short press of the Menu button confirms the
=
selection.
ROCKS MODE – This is the best mode when
observing objects after a sunny day or within urban
conditions.
FOREST MODE – This is the best mode when
searching and observing within field conditions,
against the background of leaves, bushes and
grass. The mode is highly informative about an
object being observed as well as landscape details.
IDENTIFICAION MODE – This is the best mode
when observing objects within adverse weather
conditions (fog, mist, rain and snow). It allows you to
recognize the characteristics of an object being
observed more clearly. Zoom increase may be
accompanied by insignificant image graininess.
USER MODE – It allows you to configure and save
custom brightness and contrast settings, as well as
one of the three modes as basic.
Note: Quick activation of the operating modes is
possible by using the UP button. Short press of the
UP button activates the switching of the operating
modes.
Graphics brightness
Hold down the M (9) button to enter the main
=
1
menu.
. .
Graphics Select submenu with UP (8) and DOWN (10)
. .
=
. .
brightness buttons.
. .
.
Press briefly the M button the enter the submenu.
=
Set the desired graphics brightness (menu and
=
status bar icons) from 0 to 10 with UP/DOWN
buttons.
11
Confirm your selection with a short press of the M
=
button.
Selection of colour palettes
Basic image mode is "White Hot". Menu option
"Colour palettes" allows you to select an
Color palettes
alternative palette.
Enter the main menu with a long press of the M
=
(9) button.
Enter the submenu with a short press of the M
=
button.
Select one of the palettes below with a short
=
press of the UP (10)/ DOWN (8) buttons.
Confirm selection with a short press of the M
=
button.
Black Hot – white colour corresponds to low
temperature, black colour – to high temperature;
Hot Red; Red Monochrome; Rainbow;
Ultramarine; Violet; Sepia.
Note: A long press of the UP button (10) also
activates the change of a color palette.
Selection of calibration mode.
There are three calibration modes: manual (M),
semi-automatic (SA) and automatic (А).
Calibration
Enter the main menu with a long press of the M
=
button.
Enter the submenu with a short press of the M
=
button.
Select one of the below calibration modes with
=
UP (10)/ DOWN (8) buttons.
Confirm selection with a short press of the M
=
button.
In automatic mode the need for calibration is
A
based on software algorithm. Calibration starts
automatically.
The user determines for himself the need for
SA
calibration based on the actual image status.
Manual (silent) calibration.
M
Close the lens cover before calibration.
Wi-Fi setup
This menu option allows you to set up your device
WiFi settings
for operation in a Wi-Fi network. This menu option
allows you to set a password to access your thermal
Password
imager from an external device.
setup
The password is used to connect an external device
(i.e. smartphone) to your thermal imager.
Enter the submenu "Wi-Fi" with a short press of
=
the M (9) button.
12