Pulsar HELION XQ19F Instructions D'utilisation page 5

PACKAGE CONTENTS
HELION Thermal Imaging
Scope
IPS7 Battery Pack
Battery charger with mains
charger
USB cable
This product is subject to change in line with improvements to its design.
The latest edition of this user manual is available online at www.pulsar-vision.com
2
DESCRIPTION
HELION thermal imaging scopes are based on an IR sensor (uncooled
microbolometer) are represented by a number of models featuring
various magnification and lens diameter. The scopes are designed for
the use both in the night-time and during the day in adverse weather
conditions (fog, smog, rain) to see through obstacles hindering detection
of targets (branches, tallgrass, thick bushes etc.).
HELION thermal imaging scopes do not require an external source of
light and are not affected by bright light exposure.
HELION thermal imaging scopes are designed for various areas of
application including night hunting, observation, trail orienteering, rescue
operations etc.
3
FEATURES
User-friendly interface
Four observation modes: forest, rocks, identification, user
Three calibration modes – Manual, Semi-automatic, Automatic
Eight colour palettes for observation
Built-in 3-axis accelerometer, gyroscope, magnetometer
Defective pixel repair function
Stadiametric rangefinder
Image Detail Boost function (only XP models)
Display off option
Functional and ergonomic design
Updatable features
Wide range of operating temperatures (-25 °С ...+50 °С)
3
Carrying case
Hand strap
Quick start guide
Lens cloth
Warranty card
VIDEO RECORDING
Built-in video and sound recorder
Integration with iOS and Android based mobile devices
Wi-Fi. Remote control and viewing using smartphone
YouTube. Direct video streaming and recording to the Internet via
smartphone using the Stream Vision application
BATTERY PACK:
Quick-release Li-Ion battery packs IPS7/IPS14
Operating time in Wi-Fi mode up to 16 hours*
Operation on АА or CR123 batteries**
Charging IPS7/IPS14 batteries via USB
* on Battery Pack IPS14 (sold separately).
** using special battery container (sold separately).
4
EXTERNAL VIEW AND CONTROLS
1 Lens cover
2 Lens focusing ring
3 Battery Pack
4 Micro-USB port
5 Eyeshade
6
Dioptre adjustment ring
7
Recording button REC
Navigation button DOWN
8
9 Button MENU
10 Navigation button UP
Power on/off button ON
11
Latch for lens change (only in models XP28; XP38; XP50)
12
Lever for battery pack
13
Radiator cooling system
14
Please refer to the picture (Pic.1) on the front flyleaf.
4