Publicité
Les langues disponibles
Les langues disponibles
User manual
2.
Release the left locking screw at the ice thickness limit switch.
3.
Change the position of the ice thickness limit switch:
Move upwards → thicker cubes
+
Move downwards → thinner cubes
-
4.
Tighten the screw, insert the power plug
and
switch
on
"Produktion ein/on") and monitor a production
cycle.
5.
Once the required ice thickness is
reached, switch off the machine (Position
"Produktion aus/off") and pull the power plug.
Replace the electrics box and housing covers
and fasten the screws. Re-start the machine.
IMPORTANT:
At the maximum setting, ensure that a minimum distance of approx. 1.5 to 2 mm
remains between the individual finished ice cubes (see Fig. 6.3). Otherwise there is a
risk of the machine producing an ice plate, which would lead to malfunction.
User-manual-TopLine-v.02
Limit switch ice thickness
Positioning Bolt for ice
thickness
the
machine
(Position
Deutsch 4-43 – English 44-79 – Français 80-114
Fixing bolt
Minimum distance 1.5 – 2 mm
Fig. 6.3: Setting the ice cube thickness
01/2021
65
Publicité
