Parkside PTS 710 B2 Instructions D'utilisation Et Consignes De Sécurité page 50

˜ Cleaning and care
m WARNING!
Always switch the product off, remove
the power plug from the mains power
socket and let the product cool before
performing inspection, maintenance
and cleaning work!
˜ Cleaning
Never allow fluids to get into the product.
The product must always be kept clean, dry
and free from oil or grease. Remove debris
from it after each use and before storage.
Regular and proper cleaning will help ensure
safe use and prolong the life of the product.
Clean the product with a dry cloth. Use a soft
brush for areas that are hard to reach.
NOTE
Do not use chemical, alkaline, abrasive or
u
other aggressive detergents or disinfectants
to clean this product as they might be
harmful to its surfaces.
˜ Maintenance
The product is maintenance-free.
Before and after each use, check the product
and accessories (e.g. saw blades) for wear
and damage. If required, exchange them
for new ones as described in this instruction
manual.
Observe the technical requirements
(see "Technical data").
Check covers and safety devices for damages
and correct installation. Replace as necessary.
Replace a blunt or bent saw blade or one
which has been damaged in some other way.
˜ Repair
This product does not contain any parts
that can be repaired by the user. Contact
an authorised service centre or a similarly
qualified person to have it checked and
repaired.
˜ Storage
Clean the product (see "Cleaning").
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is
inaccessible to children.
Store the product in its carrying case.
˜ Transportation
Transport the product in its carrying case.
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles.
Secure the product to prevent it from slipping
or falling over.
GB/IE 49