Télécharger Imprimer la page

Parkside PTS 710 B2 Instructions D'utilisation Et Consignes De Sécurité page 34

Scie plongeante électrique
Masquer les pouces Voir aussi pour PTS 710 B2:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
Safety instructions
˜ General power tool safety
warnings
m
WARNING!
Read all safety warnings,
u
instructions, illustrations and
specifications provided with
this power tool. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well
a)
lit. Cluttered or dark areas invite accidents.
Do not operate power tools in
b)
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders
c)
away while operating a power
tool. Distractions can cause you to lose
control.
Electrical safety
Power tool plugs must match the
a)
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed
b)
or grounded surfaces, such as
pipes, radiators, ranges and
refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain
c)
or wet conditions. Water entering a
power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use
d)
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
When operating a power tool
e)
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk
of electric shock.
If operating a power tool in a
f)
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
GB/IE
33

Publicité

loading

Ce manuel est également adapté pour:

385125 2107