Troubleshooting - CONSTRUCTA CD75132 Manuel D'utilisation Et Notice D'installation

en Troubleshooting
If the appliance has a spacer rail, remove this.
2.
Use a screwdriver to push the two tabs on the inter-
3.
mediate floor inwards.
Use the enclosed sealing strips to mask the odour
4.
filter.
9 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
24
Insert the odour filter at the rear
5.
Lock the odour filter in the centre using the wing nut
6.
⁠ .
If the appliance has a spacer rail, insert this.
7.
Install the grease filters.
8.
→ "Installing the grease filters", Page 23
8.10 Replacing the odour filter
Requirement: The grease filters have been removed.
→ "Removing the grease filter", Page 22
If the appliance has a spacer rail, remove this.
1.
Unlock the odour filter in the centre using the wing
2.
nut and remove it.
Replace the odour filter and lock it in place using
3.
the wing nut.
If the appliance has a spacer rail, insert this.
4.
Install the grease filters.
5.
→ "Installing the grease filters", Page 23
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
and fold it up ⁠ .