Troubleshooting - CONSTRUCTA CD686860 Manuel D'utilisation Et Notice D'installation

en Troubleshooting
7.7 Fitting the grease filters
1.
ATTENTION!
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
▶
Note: Note the correct position of the grease filter.
Insert the grease filter.
The lock on the grease filter clicks into place.
2.
8 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-
sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
8.1 Malfunctions
Fault
The appliance is not
working.
The LED lighting
does not work.
The button illumina-
tion does not work.
22
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
Different causes are possible.
Defective LED lights may be replaced by the manufacturer, their customer service or a
▶
qualified technician (electrician) only.
Call the after-sales service.
▶
→ "Customer Service", Page 23
The control unit is faulty.
Call the after-sales service.
▶
→ "Customer Service", Page 23
If the grease filter has been inserted incorrectly,
3.
carefully push the lock forwards, remove the grease
filter and insert it correctly.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.