Publicité
Les langues disponibles
Les langues disponibles
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 8 cm distance between each
side of the device and the wall or other objects. Keep the product away from hot
surfaces. The device should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach of children and persons
with limited mental and sensory functions. Position the device such that you
always have access to the power plug. The power cord connected to the
appliance must be properly grounded and correspond to the technical details on
the product label.
Before the first use, disassemble all elements and wash them, i.e. cooling drum,
measuring cup, agitator spirals, feeder ring gasket, feeder lid or funnel.
ASSEMBLING THE APPLIANCE
a) Mount the agitator spiral taking care that its outlet matches the gearing
spindle.
b) Fasten the feeder lever:
1) Insert part no. 3 into part no. 2 as on the picture below no.1 – with the socket
facing up.
2) Manually press part 3 into part 2 as on the picture 2 below.
3) Fasten part 1 to 2 as on the picture 3 below.
4) Insert part 4 into 3 as shown on picture # 4 below.
5) Insert part 5 into 1 as on the picture 5 below.
6) Attach part 7 to part 2 as on the picture 6 below.
7) Attach part 8 to 2, then tighten clockwise as on the picture 7 below.
8) Put part 8 on 2 as on the picture no. 8 below.
CAUTION: disassembly in reverse order.
EN
Publicité
