Hoonved ELDING NORDIC TLC100 Mode D'emploi page 16

ENGLISH
2.1 TLC OPERATION
2.1.a Switching on and Preparing machine (Fig. 1)
To turn the machine on, keep the START
(ON/OFF) key pressed for about 5 sec.
The START key turns YELLOW.
Besides the selected cycle, the
display shows the wording FILLING
(alternating with the relative warning
sign F2), which indicates the filling
phase of the boiler and tank.
The last cycle used remains set and is displayed when
the machine is switched on.
When the correct water level is
reached in the tank, the START
key FLASHES GREEN.
READY to GO appears on the
display. The machine is already
available for washing in this
condition
When the set temperature is
reached in the boiler and in the
tank, the START key remains
STEADY GREEN.
TEMPERATURE READING
At any time, with the machine ON,
it is possible to view the ACTUAL (T1/ T2) and SET-POINT
(S1/S2) temperatures, respectively, of the water in the tank
and of the water in the boiler.
T1
= TANK ACTUAL temperature
T2
= BOILER ACTUAL temperature
S1
= TANK SET-POINT temperature
S2
= BOILER SET-POINT temperature
To display the temperatures, you must:
Touch the BACK key
16
FILLING
QUICK
S1. 60 S2 85 ° C
T1. 54 T2 88 ° C
Part 2: Reserved for the operator
WASH OPERATIONS
Dispensing of detergent and rinse aid is managed
both during the filling and water restoration phases.
The amount of detergent/rinse aid must be determined
by an authorised technician and based on the volume
of water and its hardness.
With each rinse cycle, the machine automatically re-
stores the amount of detergent and rinse aid.
ATTENTION
When the items being washed have burned
encrustations or an extended amount of
time has passed before washing, they must
be soaked in water with an appropriate
emollient product.
Do not use manual washing products
as they could generate foam inside the
machine.
Introduce the dish rack into the machine after having
removed solid waste from the objects to be washed.
2.1.b CYCLE SELECTION
The duration of the wash cycle can be chosen between
different cycle times:
° QUICK
° GLASSES (DIN 10511)
° DISHES (DIN 10510)
° INTENSIVE
° ECO2
Certain extra CYCLE functions are also available
° DRAIN
° SANITIZING
° REGENERATION (Versions A)
To select, touch the SCROLL key
Every time the key is touched, the name of the set-
table cycle and its duration is displayed for 5 seconds.
QUICK