Güde ES 405/10/50 TLG Traduction Du Mode D'emploi D'origine page 28

ENGLISH
24
Compressor being overheated and
keeps switching off
Impact wrench not working or
working too slow
Compressor is overloaded
Compressor is defective
Compressor under undervoltage
Outdoor temperature of 35°C
Insufficient air pressure
Air pressure set too low
Impact wrench must be lubricated
with oil
Impact wrench must be cleaned out
Air hose is leaking
Contact the Güde service centre
Contact the Güde service centre
Contact the Güde service centre
Check the air pressure on the air inlet.
it must be 6 bar.
Increase the pressure to 6 bar
Drip 1-3 drops of oil into connection
nipple
See Servicing
Tighten all the hose screwing