Publicité
1. To measure the new tire circumference, mark the ground with
the tire valve stem at the bottom. Roll the UV forward until the
tire makes one full rotation and mark the ground again; measure
the distance between the marks to get the tire circumference.
See Figure 5-14.
Valve
Circonférence du pneu
Figure 5-14
2. Replace the 76.25" circumference in the formula with the new
measurement, compute the new circumference and input the
distance into the Gauge Accessory.
Tire Circumference and Sensor Point Setting
Refer to Figure 5-15 for the following steps.
Figure 5-15
1. In the main screen, press down the mode button for three
seconds to enter the circumference setting.
2. Example; Now the tire circumference is 1300 m/m. In setting
screen, press the set button to move to the digit you want to set.
3. Press the mode button to make the setting.
4. Press the set button to enter the sensor point setting.
S
5 — E
ECTION
NTRETIEN ET RÉGLAGES
23
Publicité
