Medela Swing Maxi Hands-free Mode D'emploi page 6

2. Intended purpose
The Swing Maxi Hands-free breast pump is a powered breast pump to be used by lactating women to express and collect milk from their breasts.
™
The Swing Maxi Hands-free breast pump is intended for a single user. The breast pump is intended to be used in a home environment.
™
3. Product description
3.1 Description of the device
The Swing Maxi Hands-free breast pump is a personal-use electric breast pump that includes 2-Phase Expression
™
single and double pumping. Mode of operation: Continuous. The operating life of the Swing Maxi
parts of the collection cups come into contact with the breast or milk. The motor unit generates an intermittent vacuum. For milk expression, the tubing
conveys the resulting air flow via a membrane, which separates the milk from the pulsing air, to the breast.
3.2 Your breast pump system features
Refer to figure ¢1 on the foldout pages.
¢ 1-01 Hands-free Collection Cups
¢1-01-1 Breast shield 21mm (2pcs) (Applied part)
¢1-01-1 Breast shield 24mm (2pcs) (Applied part)
¢1-01-2 Nipple Tunnel
¢1-01-3 Yellow membrane (2pcs)
¢1-01-4 Alignment Tab
¢1-01-5 Valve
¢1-01-6 Outer shell (2pcs)
¢1-01-7 Pouring spout
¢1-01-8 Tubing connection port
For ordering information about accessories see chapter 13.
All pictures shown in these instructions are for illustration purpose only. The actual product may vary due to local differences or product enhancement.
Medela reserves the right to substitute any component or accessory with a replacement of equivalent performance.
Hands-free breast pump is 275 hours. Only the
™
¢ 1-02 Tubing
¢1-02-1 Short ends of tubing (connect to collection cups)
¢1-02-2 Long end of tubing (connects to motor unit)
¢1-02-3 Tubing holder (use for single pumping)
¢ 1-03 Motor unit (Applied part)
¢ 1-04 Power adapter with cable
®
technology and is capable of
6