Parkside PBSA 12 E4 Traduction Des Instructions D'origine page 20

GB MT
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
The device is part of the X 12 V TEAM
series and can be operated with bat-
teries of the X 12 V TEAM series. Bat-
teries of the X 12 V TEAM series may
only be charged using chargers of the
X 12 V TEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Cordless Drill Driver
• Storage case
• Translation of the original instructions
The screwdriver bits and drill bits
are not included.
The rechargeable battery and
charger are not included in deliv-
ery.
Overview
The illustrations for the
device can be found on the
front fold-out page.
1 Drill chuck aperture
2 Keyless chuck
3 Chuck ring
4 Torque adjustment ring
5 Charge level indicator on the tool
6 Gear selector switch
7 Direction of rotation switch
8 Handle (Insulated gripping surface)
9 Battery release
10 Battery
20
11 On/Off switch
12 LED work light
13 Battery charger
14 Storage case
Fig. B
15 Bit holder
16 Magnet
Description of functions
The drill driver is equipped with a slip
clutch that decouples the drive from the
spindle when a preselected maximum
torque is reached.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Cordless Drill Driver ....PBSA 12 E4
Rated voltage U ............................. 12 V ⎓
Weight with battery (12 V, 2 Ah) .... ≈1 kg
No-load rotation speed n
– 1st gear ............................. 0–350 min
– 2nd gear ......................... 0–1300 min
Max. torque .................................... 28 Nm
Chuck capacity ....................... 0.8–10 mm
Max. drilling diameter
–wood ............................................. 25 mm
–steel ............................................... 10 mm
Sound pressure level (L
...................................... 70.1 dB; K
Sound power level (L
..................................... 81.1 dB; K
Vibration (a ) .....≤2.5 m/s²; K=1.5 m/s²
h;D
Battery ................................................. Li-Ion
Temperature ................................... ≤50 °C
– Charging ................................4 – 40 °C
– Operation ......................... −20 – 50 °C
– Storage .................................. 0 – 45 °C
0
−1
−1
)
pA
=5 dB
pA
)
WA
=5 dB
WA