Publicité
Les langues disponibles
Les langues disponibles
˜ Vibration and noise
reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use
low‑vibration and low‑noise operating modes as
well as wear personal protective equipment .
Take the following points into account to
minimise the vibration and noise exposure risks:
Only use the product as intended by its
design and these instructions .
Ensure that the product is in good condition
and well maintained .
Use correct accessory tools for the product
and ensure they are in good condition .
Keep tight grip on the handles/grip surface .
Maintain this product in accordance with
these instructions and keep it well lubricated
(where appropriate) .
Plan your work schedule to spread any high
vibration tool use across a longer period
of time .
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this product
by means of this instruction manual . Memorise
the safety warnings and follow them to the
letter . This will help to prevent risks and hazards .
Always be alert when using this product,
so that you can recognise and handle risks
early . Fast intervention can prevent serious
injury and damage to property .
Switch the product off and disconnect it
from the mains if there are malfunctions .
Have the product checked by a qualified
professional and repaired, if necessary,
before you operate it again .
˜ Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain .
The following dangers can arise in connection
with the structure and design of this product:
Health defects resulting from vibration
emission if the product is being used over
long periods of time or not adequately
managed and properly maintained .
Injuries and damage to property due to
broken accessory tools or the sudden
impact of hidden objects during use .
Danger of injury and property damage
caused by flying objects .
NOTE
This product produces an electromagnetic
u
field during operation! This field may
under some circumstances interfere with
active or passive medical implants! To
reduce the risk of serious or fatal injury,
we recommend persons with medical
implants to consult their doctor and the
medical implant manufacturer before
operating this product!
˜ Practical tips
m
WARNING!
When selecting the tool, ensure that its
u
specified permissible rotation speed is
at least as high as the maximum rotation
speed specified on the product .
When selecting the disc, pay attention to
u
the maximum permissible diameter and
the maximum permissible thickness .
Pay attention to the thread size M14
u
when selecting the brush .
GB/IE/NI
15
Publicité
