Parkside PARRW 20-Li A1 Traduction Des Instructions D'origine page 29

er body parts exposed to drain
contents. This will help reduce the
risk of health hazards due to exposure
to toxic or infectious material.
• Only use the drain auger for
the recommended drain sizes.
Using the wrong size drain cleaner can
lead to twisting, kinking or breaking of
the cable and may result in personal in-
jury.
Residual risks
There will always be residual risks even
if you operate this power tool according
to the instructions. The following hazards
may occur in connection with the type and
design of this power tool:
• Eye damage if no suitable eye protec-
tion is worn.
• Lung damage if suitable respiratory
protection is not worn.
• Health injuries resulting from the effect
of vibration on the hands and arms in
the event that the device is used over
a longer period of time or is not used
and maintained properly.
• Abrasions.
WARNING! Danger due to electro-
magnetic field generated while the ma-
chine is in operation. Under certain cir-
cumstances, this field may negatively af-
fect active or passive medical implants.
In order to reduce the danger of serious
or fatal injuries, we recommend that indi-
viduals who wear medical implants should
consult their doctor and the manufacturer
of the implant before operating the ma-
chine.
Preparation
WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
The device has the operating parts direc-
tion of rotation switch (4), auxiliary handle
(3) and on/off switch (5). Depending on
the setting, the direction of rotation/move-
ment and speed of rotation of the cleaning
spiral changes (1).
• Direction of rotation switch
(4) (Fig. A)
NOTICE! Only operate the direction
of rotation switch when the tool has
stopped!
The letter on the direction of rotation
switch (4) indicates the working direc-
tion.
The direction of rotation switch can be
set to the following 3 positions:
Posi- Direction
tion of rotation
⭮ Clockwise Normal operation
R
⭯ Anti-
L
clockwise
Centre No rotation
• Auxiliary handle (3)
The letter on the direction indicator (2)
indicates the direction of movement.
The following 3 positions can be set
with the auxiliary handle:
Direction Function Clock-
indicator
R
Cleaning spiral is retracted
C
Length remains constant
F
Cleaning spiral is extended
GB MT
Function
ONLY for pulling
in a blocked
Cleaning spiral
Switch lock
wise rotation
29