Mustang Survival MIT 70 Manuel D'utilisation page 7

INSPECTING COMPONENTS
Before each use, check your flotation device for readiness:
1. Place your flotation device with logo facing up on a flat surface
with the bottom of the device facing you. At the bottom of
the left lobe, lift the inflator cover to expose the inflator and
cylinder assembly. Examine the service indicator to ensure it is
green (Fig. 1). If the service indicator is red, the mechanism
has been fired or is incorrectly fitted and must be re-armed
(see "Re-arming" on page 10 for MD4041 or page 12 for
MD4042). The status indicator must be GREEN before you
proceed.
FIGURE 1.A
MD4041 STATUS INDICATOR
MD4042
Status Indicator
4