Mustang Survival MIT 70 Manuel D'utilisation page 10

INFLATING
Your flotation device inflates manually, orally, and (for MD4042
only) automatically. No matter how your flotation device inflates, it
can always be topped up orally – extending your ability to keep
afloat.
The inflation instructions below use 'left' and 'right' assuming you
are wearing the flotation device during inflation – so your left or
right is also the device's.
1. Manually
Activate the inflation system by
jerking firmly downward on the pull-
tab (Fig. 4). The flotation device
should fully inflate within
five seconds.
2. Automatically as backup
(MD4042)
Inflation will occur automatically
within 10 seconds after the inflator
is immersed in water. The water-
sensing bobbin will disintegrate,
triggering a spring-loaded plunger,
which punctures the CO
(Fig. 10) to inflate the flotation
device. See also
"Special Considerations for
Automatic Devices," next page.
3. Orally
To orally inflate the flotation
device, first locate the oral inflation
tube by opening your left front
panel. Remove the cap from the
end of the oral tube and blow into
the tube until the flotation device is
fully inflated (Fig. 5). Place the oral
tube cap back in the stowed
position (Fig. 7).
7
Manual Inflat
MD40
cylinder
2
FIGURE 4 PULL-TAB
ORAL INFLATION
FIGURE 5
Automatic Inflat
MD40