Publicité
Les langues disponibles
Les langues disponibles
Letters in rectangle[_
|
= buttons on the remote control handset
|
7
[D|
[E]
Is]
Station position selection (1, 2, 3...0/AV)
and switching on the unit from "standby"
(see [K))
Switching between station and channel
selection (also special channels)
Remote control of a video recorder;
see operating instructions of the video
recorder.
Group of buttons
station position selection (1, 2,3...)
2,1)
V
station position selection (...3, 2, 1
<4
lower volume
>
higher volume
OK
back to basic adjustment
(the basic adjustment
is the op-
timum
adjustment
made
in the
factory).
"Holding" a page on Teletext operation
Switching on/off Teletext
Preselect buttons for correcting the pic-
ture adjustments; first preselect the func-
tion the setting of which you wish to
change.
® = = black/white contrast;
@
= colour contrast;
0}
= brightness;
TINT = tint correction on NTSC recep-
tion (USA standard);
a dot will flash in the display 40; during
this time press button < or > — until the
desired result is obtained.
[H]
im
[K]
Clock time indication
Sound on/off (Muting)
Switching to standby
For pauses during watching TV, you can
switch the TV set to standby with this
button.
The display
will show a horizontal
line.
Approx. 10 minutes after the end of a
transmission or when the transmission is
interrupted,
the TV set automatically
switches to standby.
To switch the TV set on again, use one of
the station selection buttons [A].
[E], LF], and [H] only with built-in Teletext
decoder and during Teletext broadcasts.
13
Publicité
