Grundig P25-449/12 Manuel D'utilisation page 16

TV stations can be assigned to TV station
positions
— by directly entering the respective chan-
nel number or
- with the help of the station (channel)
search system.
Selecting the TV standard code number
@ Press button NG).
— Indication in the display, eg: nO (n stands
for standard).
@ Select the required standard (code No.)
with button 41) + or — (see page 14, table
"TV standards").
— Indication in the display: nO ton 4.
Assignment of stations to the sta-
tion positions by directly entering
the channel number
Find out, on which channels the first, sec-
ond, third and any other programmes are
broadcasted in your area (ask your dealer
or the house supervisor).
Example:
The second programme is broadcasted on
channel 34 and you wish to assign this
programme to station position 2.
@ Selecting station position 2 on the TV set
— Press button 44) until the display 40 shows 2.
@ Switching the TV set to channel mode
— Press button @).
The display shows C (8) for channel and a
random number.
If you wish to enter a special channel,
press button () until the display shows
S @ for special channel.
@ Entering the channel number
— Press button @1) (— or +) until the display
shows 34.
® Storing the channel number
— Press button ©).
Tuning to TV Stations
transmitted.
Example:
TV station RTL to station position 5.
Selecting station position 5
shows 5.
Press button (3).
random number.
Selecting the station search mode
Press button (2).
Starting the station search
Press button (0.
received.
station is found.
The display 40 shows the figure 5.
Following this example, you can assign all
programmes "found" by the station search
on the various channels to the station posi-
tions of the TV receiver.
15