Silk-n BRIGHT Mode D'emploi page 17

9 Storage
EN
All parts must be completely dry before being stored.
• Store all parts in a clean and dry place, avoiding heat and direct
sunlight.
• Store the facial brush in the travel case
avoid damage.
10 Troubleshooting
Some problems may be caused by minor faults that you can fix
yourself. To do so, follow the instructions in the following table.
If it is still not possible to resolve the problem, contact customer
service. Do not repair the facial brush yourself.
Fault
The facial brush
does not start.
The facial brush
does not charge.
11 Technical data
Facial brush (Bright & Bright Mini)
Model:
Rated voltage:
Rated power:
Battery capacity:
IP code:
Protection class:
Speed settings:
Modes:
17
Possible cause and solution
Make sure the facial brush is properly
charged.
Make sure the USB cable is securely connected
between the facial brush and USB wall
adapter, and the USB wall adapter is properly
connected to a mains socket.
ND-FC04 (Bright)
ND-FC05 (Bright Mini)
5 V
3 W
500 mAh (Bright)
300 mAh (Bright Mini)
IPX7 (protected against water
immersion for up to 30 minutes
at a depth of 1 m)
III
7 (Bright)
2 (Bright Mini)
Vibrating and pulsating
when traveling to
11