Silk-n BRIGHT Mode D'emploi page 12

4 Checking the facial brush and package
contents
NOTICE! RISK OF DAMAGE!
• If you are not cautious when opening the
packaging with a sharp knife or other pointed
objects, you may quickly damage the facial
brush. Be very careful when opening it.
1. Take the facial brush out of the packaging.
2. Check to make sure that all parts are included (see Fig. A or B).
3. Check whether the facial brush or individual parts are damaged.
If this is the case, do not use the facial brush. Contact our
customer service.
5 Charging
WARNING! RISK OF INJURY!
• Do not charge when the facial brush is in
use or if it is wet. Make sure it is dry before
charging.
• Only charge the facial brush with the
supplied USB cable and USB wall adapter.
• Only charge the facial brush at
temperatures between 0 and 40 °C.
• Always unplug the facial brush after charging
has been completed.
• Fully charge the facial brush before first use and when
the battery power is low.
• When the battery power is low, the LED light
becomes red and starts to blink. Recharge the facial
brush.
• The facial brush cannot be used during charging.
EN
12