Silk-n BRIGHT Mode D'emploi page 14

• The "Bright" version has 7 speed settings for each mode. The
"Bright Mini" version has 2 speed settings for each mode.
6.3 Using the "Bright" version
Switching on/off and selecting an operation mode
1. Press the control button ( )
switched on and in the vibrating mode.
You will hear one beep sound when the facial brush is
switched on.
2. Press the control button ( ) again. The facial brush is now in
the pulsating mode.
3. Press the control button ( ) a third time to switch off the
facial brush.
You will hear two beep sounds when the facial brush is
switched off.
Selecting a speed setting
1. Select an operation mode (see chapter "Switching on/off and
selecting an operation mode").
2. Press the increase button ( )
in the selected operation mode to select a speed setting (1–7).
The default level is 4.
6.4 Using the "Bright Mini" version
1. Press the control button ( )
switched on and in the vibrating mode at a low speed.
You will hear one beep sound when the facial brush is
switched on.
2. Press the control button ( ) again. The facial brush is now in
the vibrating mode at a high speed.
3. Press the control button ( ) a third time. The facial brush is
now in the pulsating mode at a low speed.
4. Press the control button ( ) a fourth time. The facial brush is
now in the pulsating mode at a high speed.
5. Press the control button ( ) a fifth time to switch off the facial
brush.
You will hear two beep sounds when the facial brush is
switched off.
once. The facial brush is now
6
or decrease button ( )
5
once. The facial brush is now
6
EN
7
14