Thermador Professional PRO-GRAND PG30 Instructions D'installation page 17

Step 7: Backguard Installation
The backguard must be attached before sliding the
range into the final installed position. A Low Back or
Pot and Pan Shelf must be installed when there is less
than a 12" clearance between combustibles and the
back of the range above the cooking surface. (See
Fig. 2A and 2B on Page 5).
An Island Trim is available for covering the backguard
mounting flanges for island installations, where there
is a minimum of 12" of horizontal clearance between
combustibles and the back of the range. (See Fig. 2B
on Page 5).
The backguard is inserted, as shown in Fig. 8, into the
guide channels on the back of the range. Secure the
backguard with the (4) sheet metal screws provided.
Front of Unit
Chart C: Backguard Kit Mode_ Numbers
Model Width 9" Std. Low Back 12" Low Back 22" Pot and Pan Shelf
30" Included N!A HS30R
36" NiA LB36R HS36R
48" NiA LB48R HS48R
Backguard
Installed
3o3/4" island Trim
IT30R
IT36R
IT48R
14