Parkside PKS 1500 C4 Consignes D'utilisation Et De Sécurité page 8

1 Explanation of the symbols on the product
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompany-
ing explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace prop-
er accident prevention measures.
Before commissioning, read and observe the operating manual and safety instructions!
Wear hearing protection.
If dust builds up, wear respiratory protection!
Wear safety goggles.
Attention! Danger of injury! Do not reach into saw blade while it is running!
Attention! Laser beam
Protection class II (double insulation)
The product complies with the applicable European directives.
Signal word to indicate an imminently hazardous situation which, if not avoided, will result in
DANGER
death or serious injury.
Signal word to indicate a potentially hazardous situation which, if not avoided, could result in
WARNING
death or serious injury.
Signal word to indicate a potentially hazardous situation which, if not avoided, could result in
CAUTION
minor or moderate injury.
Signal word to indicate a potentially hazardous situation which, if not avoided, could result in
ATTENTION
product or property damage.
2 | GB / IE / NI / CY / MT