Parkside PFRB 26 A1 Traduction Des Instructions D'origine page 6

GB
• Keep your work area tidy.
An untidy workplace can lead to
accidents.
• Wear suitable work clothing.
- When working outdoors, non-slip
footwear is recommended.
- Wear a hair net to contain long hair.
• Consider environment influences.
Make sure the workplace is well lit.
• Use only original accessories and do
not carry out any modifications.
Assembly
1. Connect the two extensions (3) to the
surface cleaner broom (4) by inserting,
pressing and turning (bayonet lock).
2. Fix the connections by tightening the
two coupling nuts (2).
Operation
Connecting the pressure
washer attachment
Connecting without adapter
1. Connect the accessory to your Parkside
pressure washer via the high-pressure
connection by inserting, pressing and
turning (bayonet lock).
2. Fix the connection by tightening the
coupling nut (2).
Connecting with adapter
1. Connect the adapter (1) to the access-
ory by inserting, pressing and turning
(bayonet catch).
2. Fix the connection by tightening the
coupling nut (2).
3. Connect the adapter (1) to your
Parkside pressure washer via the
6
high-pressure connection by inserting,
pressing and turning (bayonet lock).
4. Fix the connection by tightening the
coupling nut (2).
Disconnecting:
Disconnection is done in reverse order.
Adjusting the surface cleaner
broom
Use the valve (6) to open the side nozzle.
I Valve open, side nozzle (7) sprays
0 Valve closed, side nozzle does not
spray
Cleaning/maintenance
Perform the following cleaning work regu-
larly. This will guarantee long and reliable
use.
General cleaning work
Do not use any abrasive
cleaning agents or solvents.
These could damage the
plastics irreparably.
• Clean the pressure washer attachment
with a damp cloth as needed.
Maintenance
The pressure washer attachment is
maintenance free.
The rubber lip (5) of the surface cleaner
broom can be replaced. Pull the rubber
lip (5) upwards and replace it with a new
one.