Progress PKT1440 Notice D'utilisation page 27

Important! Remove the furniture door
damper if possible, to provide free space for
the free movement of the appliance door.
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do these steps.
1. Install the sealing strip.
a) Remove the strip cover.
b) Apply the adhesive sealing strip to
the appliance as shown in figure.
2. Install the appliance in the niche.
a) Push the appliance in the direction of
the arrows (1) until the upper gap
cover stops against the kitchen fur-
niture.
b) Push the appliance in the direction of
the arrows (2) against the cupboard
on the opposite side of the hinge.
All manuals and user guides at all-guides.com
min 1 mm
3. Adjust the appliance in the niche. Align
the lower hinge with the kitchen furniture.
4. Attach the appliance to the niche with 4
screws.
progress 27
2
1
I
P