Télécharger Imprimer la page

Progress PKT1440 Notice D'utilisation page 25

Publicité

Les langues disponibles

Les langues disponibles

Technical data
Dimension of the recess
Rising Time
The technical information are situated in the
rating plate on the internal left side of the ap-
pliance and in the energy label.
Installation
Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Warning! If you are discarding an old
appliance that has a lock or catch on the
door, you must ensure that it is made
unusable to prevent young children
being trapped inside.
Important! The appliance shall have the
plug accessible after installation.
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suit-
ably sized auto-transformer must be used.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
All manuals and user guides at all-guides.com
Height
Width
Depth
1446 mm
560 mm
550 mm
20 h
current regulations, consulting a qualified
electrician.
The Manufacturer declines all responsibility if
the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
Door reversibility
The door of the appliance opens to the right.
If you want to open the door to the left, do
these steps before you install the appliance:
1. Loosen and remove the upper pin.
2. Remove the upper spacer.
3. Remove the upper door.
4. Loosen and remove the middle hinge.
5. Remove the lower door.
6. Loosen and remove the lower pin.
7. Remove the lower spacer.
progress 25

Publicité

loading