VINCENT SAV-C1 Manuel D'utilisation page 29

DIGITAL
INPUT
2 CH
ANALOG
INPUT
2 CH
ANALOG
INPUT
VIDEO
INPUT
2 CH
ANALOG
INPUT
BALANCED
Stereo XLR Signal source
(CD, Tuner etc.)
XLR
AUDIO OUTPUT
*) Use an empty socket, depending on the preamplifier input to which you have allocated the
source unit.
**) You generally only have to connect one of the three video connections. This depends on which
standards your AV-sources and the Video display support.
***) If you have a video recorder with an S-Video output, it can be used provided that one of the
preamplifier inputs "DVD/AV2" or "D-TV/AUX2" is not occupied by another source unit and can be
used instead of the preamplifier input "VCR/AUX3" to connect the video recorder.
****) The digital terminals belong to the preamplifier inputs "CD/AV1", "DVD/AV2", "D-TV/AUX2" or
"SAT/AUX1". They can be distributed as desired over them.
56 Vincent
DIGITAL
OUTPUT
CD, CD-Recorder, DAT,
audio
( **** )
MD, MD-Recorder
ANALOG
OUTPUT
audio
( * )
Tuner, Tape,
ANALOG
OUTPUT
Phono-Preamplifier
audio ( * )
VIDEO
OUTPUT
video
( *** )
Video recorder
ANALOG
OUTPUT
audio ( * )
DVD, DVD-Recorder,
SACD, DVD-Audio, etc.
ANALOG
AUDIO OUTPUT
CONNECTION OF ONE OR MORE
POWER AMPLIFIERS AND THE SUBWOOFER
You will find the terminals for the power amplifiers in
the "ANALOG AUDIO OUTPUT" terminal field (17).
The multi-channel input "6.1 CHANNEL ANALOG
AUDIO INPUT" (16) must not be confused with the
RCA multi-channel output!
Power amplifier channels for up to 2 pairs of front
speakers (Front: right, left), one Centre speaker, two
Surround speakers (Rear: right, left), one rear centre
speaker (Surround Centre) and up to two subwoofers
can be connected using RCA connections in the bot-
tom part of the terminal field. The additional pair of
RCA outputs for the Front signals (right, left) can be
used to carry sound to a second zone (another room)
using a separate stereo power amplifier and spea-
kers.
Power amplifier channels for two front speakers
(Front: right, left), one Centre speaker, two Surround
speakers (Rear: right, left), one rear centre speaker
(Surround Centre) and one subwoofer can be connec-
ted using XLR connections in the top part of the termi-
6 Channel power amplifier
INPUT INPUT INPUT
Stereo Stereo Stereo
power amplifier power amplifier power amplifier
nal field.
Our sketch shows both the possible connections (XLR,
RCA). However, connecting the two types of connec-
tor with power amplifiers is unnecessary. Main ampli-
fier XLR connections are to be preferred. Of course, it
is also possible to connect the subwoofer cable to the
RCA terminal field and connect all other channels via
XLR connections.
Several mono or stereo power amplifiers and one
multi-channel power amplifier can both be used. Two
possible examples are shown in the sketch: one six-
channel output amplifier at the XLR terminals and
three stereo output amplifiers at the RCA terminals.
Connect "FL" and "FR" to the channel inputs of the
power amplifier(s) for the front channels. The "CEN-
TER" connector should be connected to the channel
input of the power amplifier for the centre speaker.
"SL", "SC" and "SR" should be connected to the
power amplifier(s) for the Surround speakers.
active Subwoofer
AUDIO
ANALOG IN
AUDIO
INPUT
passive Subwoofer
INPUT INPUT
Stereo
Mono power
amplifier
power amplifier
Vincent 57