Included In Delivery; Front View; Description Of The Device - VINCENT SAV-C1 Manuel D'utilisation

INCLUDED IN DELIVERY

Please check the contents of the packaging, which in addition to the
appliance should contain the following accessories:
• 1 SAV-C1 remote control
• 2 AAA (LR3) batteries
• 1 power cable
• this manual

DESCRIPTION OF THE DEVICE

Home cinema systems should be able to play
back original films authentically and enable them
to become an experience. Total home-cinema
solutions based particularly on tailored Vincent
components take high-grade movie material to
the highest form. Due to the careful design of cir-
cuits, current decoder technology, the solid
mechanical construction and reserve power from
the power supply, they master film scenes with
explosive dynamics as well as quiet and tender
passages of the film soundtrack. Doing all that,
they constantly set price-performance yardsticks.
The SAV-C1 is a 6-channel decoder/preamplifier
The machine offers
• decoder technology for dts 5.1, dts ES 6.1 Matrix, Dolby Prologic II, Dolby Digital 5.1,
Dolby Digital EX 6.1 and PCM-Stereo
• various DSP sound-processing programs for simulation of spatial acoustics
• a clear, high-contrast display to show selected settings and the operating mode
• remote control of all functions
• the ability to allocate digital sound connections to selectable pre-amplification inputs as
the listener wants
• audio input connections, by means of which up to 8 sources (3 coaxial digital, 1 optical digital,
6 high-level stereo inputs, an XLR stereo input and a 5.1 RCA multi-channel input) can be connected
• the ability to use various picture signal formats: Component YPbPr, S-Video or Composite
• an audio output (stereo) for a recorder (REC OUT)
All user settings are made directly at the machine without the need to use complex screen menus.
44 Vincent
stage that fulfils every wish in the multi-channel
range: it offers superb quality sound, high-grade
processing and comprehensive equipment.
Digital conversion is not carried out via several
analogue sound inputs to play back analogue
sources such as an analogue CD-player in the
best quality. In combination with one or more
Vincent main amplifiers a system can be created,
which makes a separate stereo system redun-
dant. The possibility of connecting all power
amplifier channels and one stereo sound source
by means of symmetrical XLR connections deve-
lops additional, professional uses.

FRONT VIEW

1 2
5 6 7
1. INPUT/PARAMETER: To select the input
channel and to be used as multi-function button
for the "SPEAKER", "CHANNEL", "DELAY" and
"TONE" settings
2. Display Shows information regarding the
mode and the name of the selected input channel.
Selectable parameters are to be seen while
settings are being made.
3. Infrared receiver for the remote control
4. MASTER VOLUME:
Locking, continuously rotating knob for adjusting
the master volume of the system.
5. POWER: Mains Switch
Switches the machine on and off.
6. IN MODE Use this to switch between use of
the analogue sound connection and the currently
allocated digital sound connection for the pream-
plifier inputs "CD", "DVD", "SAT", and "D-TV".
Use "DIN.SET" (23) for the allocation.
7. MODE: Sound Playback Mode To switch
between different two- or multi-channel sound-
playback modes such as "STEREO" or "DTS5.1".
No alternative sound playback mode can be
selected for the "CD", "DVD" (if set to analogue
sound), "XLR" and "6.1CHANNEL" inputs.
3 4
8 9 10 11
8. CHANNEL: Changes the volume of the indivi-
dual speaker channels and adjusts the stereo
balance. The values are adjusted using the
"PARAMETER" knob (1) or the "SET" keys (31).
They can only be set for the channels currently
supported in the playback mode presently
selected (STEREO, DTS, etc.).
9. TONE: Sound Control For raising or
lowering highs and lows, as well as switching
off the TONE function. Changes are made
using the "PARAMETER" knob (1) or the
"SET" keys (31).
10. SPEAKER: Speaker Configuration
For storage of various data on the speaker
system for optimum signal adaptation by using
the "SET" keys (31) or the "PARAMETER" knob
(1). This cannot be adjusted if one of the "CD",
"DVD" (if set to analogue sound), "XLR" or
"6.1CHANNEL" inputs is selected.
11. MUTE: Mute Volume
To switch off the signals to the preamplifier
outputs in the "ANALOG AUDIO OUTPUT" (17)
connection field. Pressing it again restores the
original volume.
Vincent 45