Publicité
Les langues disponibles
Les langues disponibles
Battery pack
Type:
Rated voltage:
Capacity:
Energy value:
Number of cells:
Rapid battery charger
with VDE plug:
with BS plug:
Input:
Rated voltage:
Rated frequency:
Rated power:
Fuse (internal):
Protection class:
Output:
Rated voltage:
Charging current:
Charging
HG09673
times
HG08983
Recommended ambient temperature:
While charging:
During operation:
During storage:
* Battery pack and charger are not included.
Noise emission value
The measured values have been determined in
accordance with EN 62841. The A-rated noise
level of the power tool is typically as follows:
Sound pressure level L
Uncertainty K
:
pA
Sound power level L
WA
Uncertainty K
:
WA
HG08981 *
Lithium-Ion
20 V
max.
4.0 Ah
80 Wh
10
HG08903 *
HG08983-BS *
230–240 V
~
50 Hz
120 W
3.15 A/
II/
21.5 V
4.5 A
HG08981
45 min
60 min
+4 to +40 °C
+4 to +40 °C
+10 to +30 °C
:
80.5 dB
pA
3.0 dB
:
88.5 dB
3.0 dB
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Working mode:
Vibration emission value
max. a
:
h,DS
NOTE
The specified hand-arm vibration value
u
is based on sanding with an abrasive
sheet. Different applications may result in
different values.
The noise and vibration values were
u
determined according to EN 62841-1
and EN 62841-2-3.
The specified total vibration value and the
u
specified noise emission value have been
measured according to a standardized
test method and can be used to compare
one power tool with another.
The specified vibration value can also be
u
used for the initial evaluation of exposure.
m
WARNING!
The vibration and noise emissions
u
during the actual use of the power tool
may deviate from the indicated values,
depending on the way in which the
power tool is used, in particular what
type of work piece is being processed.
It is necessary to establish safety
u
measures for the protection of the
operator, which are based on an
estimate of the vibration load during the
actual use conditions (here all parts of
the operating cycle must be taken into
account, for example, times when the
power tool is switched off and those
when it is switched on) but runs without
load).
2.815 m/s
2
GB/IE
37
Publicité
