Publicité
Les langues disponibles
Les langues disponibles
Installation instructions - Audi A8 PU from 2014 ▶
Edition 09.2013
– Unlock the fuse carrier -1- and push it out of fuse holder F
-2- to the rear -in the direction of the arrow-.
Note
For vehicles without a ST 5 fuse carrier -5- (highlighted in red),
use the fuse carrier from the installation kit.
– Undo the retaining clips -arrows- and remove the cover from
the fuse carrier.
– Pull out the retaining strip -1- for the electrical connectors -
arrow-.
– Pin the contact for the black wire into chamber 2.
– Pin the contact for the red/blue wire into the free chamber 5.
– Pin the contact for the red/black wire into the free chamber
8.
– Pin the contact for the red wire into the free chamber 9.
– Install the fuse carrier by following these steps in reverse or-
der.
18
5 Electrical connection
Publicité
