Publicité
Les langues disponibles
Les langues disponibles
– Unlock the fuse carrier -1- and push it out of fuse holder F
-2- to the rear -in the direction of the arrow-.
– Release the retaining clips -in the direction of the arrows-
and remove the cover from the fuse carrier.
– Pull out the retaining strip -1- for the electrical connectors -in
the direction of the arrow-.
– Unpin contact 10 A and pin into the connector for the black/
violet wire of the retrofit wiring harness.
– Pin the black/violet adapter wire provided into the free con-
tact 10A and connect to the retrofit wiring harness.
– Install the fuse carrier by following these steps in reverse or-
der.
Electrical connection on the ST 5 fuse carrier -5- (red).
Installation instructions - Audi A8 PU from 2014 ▶
Edition 09.2013
5 Electrical connection
17
Publicité
