With Hand Terminal - Lenze starttec 1 Instructions De Montage

Show/Hide Bookmarks
The hand terminal E82ZBB and the necessary connection cable can be ordered as accessories. A full
description can be obtained from the information included in the hand terminal delivery.
Menu structure
All parameters for controller setting or monitoring are saved in codes under the menus user and all.
The codes have numbers 6 and are abbreviated in the text with a "C" before the number. Some codes
store the parameters in numerical "subcodes" 7 to ensure that parameter setting is clearly structured
(example: C0517 menu user).
The menu user
l
– is active after every mains connection if the hand terminal is already connected or plugged
into the AIF interface during operation.
– contains all codes required for a standard application (Lenze setting).
– can be modified as required under C0517.
The menu all
l
– contains all codes.
– shows a list of all codes in ascending order.
The change between user and all and how to change parameters in the codes are described
l
on the following pages.
L
0
1
2
3
4
5
6
7
8
EDK71MMXXX-010 DE/EN/FR 2.0
Commissioning

With hand terminal

Function keys
Status display
Bargraph display
Function bar 1
Function bar 2
Parameter set
Code number
Subcode number
Parameter value with unit
7
Changes Changes
possible possible
when lamp is
blinking blinking
85