Commissioning; Before Switching On - Lenze starttec 1 Instructions De Montage

Show/Hide Bookmarks
(
Stop!
Short circuits or earth faults in the wiring destroy the starttec. Check the wiring for
short circuit and earth fault.
Damage to persons and material can be avoided by checking
Wiring: completeness, earth fault and short circuit.
l
Emergency off function of system
l
Correct setting of rated motor current.
l
Close the starttec cover!
If you use the AIF interface, use the enclosed rubber cap to cover the interface. Otherwise protection
class IP65 cannot be guaranteed!
L
-25-
2.4 Nm
21 lb-in
EDK71MMXXX-010 DE/EN/FR 2.0

Commissioning

Before switching on

}
7
-26- start019
83