Safety Instructions; Motor Starter - Lenze starttec 1 Instructions De Montage

Show/Hide Bookmarks

Safety instructions

1

Motor starter

General safety and application notes for Lenze motor starters-16-
(according to Low-Voltage Directive 73/23/EEC)
1. General
Some parts of Lenze motor starters can be live, moving and rotating, depending on their protection class. Surfaces
can be hot.
Non-authorized removal of the required cover, inappropriate use, incorrect installation or operation, creates the risk
of severe injury to persons or damage to material assets.
For further information, please see the documentation provided.
All operations concerning transport, installation, and commissioning as well as maintenance must be carried out by
qualified, skilled personnel (IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and
national regulations for the prevention of accidents must be observed).
According to this basic safety information qualified skilled personnel are persons who are familiar with the installation,
assembly, commissioning, and operation of the product and who have the qualifications necessary for their
occupation.
2. Application as directed
Motor starters are components which are designed for installation in electrical systems or machinery. They are not
to be used as appliances. They are intended exclusively for professional and commercial purposes according to EN
61000-3-2. The documentation includes information on compliance with the EN 61000-3-2.
When installing motor starters in machines, commissioning (i.e. the starting of operation as directed) is prohibited
until it is proven that the machine complies with the regulations of the EC Directive 98/37/EC (Machinery Directive);
EN 60204 must be observed.
Commissioning (i.e. starting of operation as directed) is only allowed when there is compliance with the EMC Directive
(89/336/EEC).
The motor starters meet the requirements of the Low Voltage Directive 73/23/EEC. The harmonised standards of the
series EN 60947-4-2/DIN VDE 0660 apply to motor starters.
The technical data and information on connection conditions are to be obtained from the nameplate and the
documentation and must be observed in any case.
Warning: The availability of motor starters is restricted according to EN 60947-4-2/DIN VDE 0660. These products
can cause radio interference in residential areas. In this case, special measures can be necessary.
3. Transport, storage
The notes on transport, storage and appropriate handling must be observed.
The climatic conditions according to EN 60947-4-2/DIN VDE 0660 must be observed.
4. Installation
The motor starters must be installed and cooled according to the regulations given in the documentation.
Ensure careful handling and avoid mechanical stress. Do not bend any components and do not change any insulation
distances during transport or handling. Do not touch any electronic components and contacts.
Motor starter contain electrostatically sensitive components, which can easily be damaged by inappropriate handling.
Do not damage or destroy any electrical components since this might endanger your health!
L
61
EDK71MMXXX-010 DE/EN/FR 2.0