Publicité
Les langues disponibles
Les langues disponibles
InstallatIon
General information
InstallatIon
1. General information
this document is intended for contractors.
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on the instructions to a new user if required.
f this symbol indicates that you have to do something. the
action you need to take is described step by step.
Relevant documents
operating and installation instructions for system
components
Note
Please see appliance operating and installation inst-
ructions for information on the "Guarantee" and "En-
vironment and recycling".
2. Safety
only qualified contractors should carry out installation, com-
missioning, maintenance and repair of the kit.
2.1
General safety instructions
We guarantee trouble-free function and operational reliability
only if original accessories and spare parts intended for the
appliance are used.
2.2 Instructions, standards and regulations
Note
observe all applicable national and regional regula-
tions and instructions.
2.3 Intended use
the compact heat pump installation is intended for heating
heat pumps without integral heating circuit pump.
any other use beyond that described shall be deemed inappro-
priate. observation of these instructions and of instructions
for any accessories used is also part of the correct use of this
appliance.
6 |
3. Kit description
the compact heat pump installation includes all required com-
ponents for hydraulic connection of the heat pump to buffer
cylinders with 200, 400 and 700 l capacity. select and retrofit
the heating circuit pump according to the system in Dn 25.
3.1
Standard delivery
- Insulation
- Kit WPKI 5-I
the kit is supplied in pre-assembled individual parts. all pre-as-
sembled components are factory sealed.
Note
a gravity brake is fitted in the buffer cylinder connec-
tor.
the opening pressure is 400 mmWC.
3.2 Required accessories
- Circulation pump UP 25/7.5 PCV
4. Installation
Note
the WPKI 5-I safety valve must not be able to be iso-
lated from the heat source.
Note
all shut-off devices are tightly sealed ball shut-off val-
ves.
f only use an open-ended spanner (aF 8) to open
and close the ball shut-off valves.
WPKI 5-I
Publicité
