ABB PVS800 Manuel D'exploitation page 13

9
09.12 SUPPLY ALARM WORD
Removed actual signals

No. Name/Value
04 INFORMATION
04.07 CONV MAX VOLTAGE
04.08 CONV MAX CURRENT
Update notice
Bit Name
13 POWER STOP
RAMP
14 LVRT RETURN
PLIM
15 U FREQ PLIM
Inverter unit alarm word.
Bit Fault
0 COMM MODULE (7510) (page 149)
1 PANEL LOST (5300) (page 153)
2 DI1 (9088) (page 150)
3 Reserved
4 PVS800 TEMP (4294) (page 154)
5 Reserved
6 PLIM EXT TMP (44A0) (page 153)
7 QLIM EXT TMP (44A1) (page 154)
8 QLIM PVS TMP (44A2) (page 154)
9 RUN DISABLED (FFAC) (page 155)
10 NET LOST (32A3) (page 153)
11 EXT EVNT DI7 (908E) (page 151)
12 RECHARGE ALM (3250) (page 155)
13 EXT EVNT DI4 (908B) (page 151)
14 EXT EVNT DI5 (908C) (page 151)
15 Reserved
Bit value: 1 = alarm, 0 = no alarm
FbEq Description
Program versions, inverter ratings
1 = 1 V Maximum value of inverter voltage measurement range [V]
1 = 1 A Maximum value of inverter current measurement range [A]
Value Description
1 Active and/or reactive
power is limited during a
controlled stop.
1 Return ramp after Low
voltage ride-through is
limiting the active power.
1 Active power is limited
according to the grid
underfrequency
characteristic curve.
PB
T
R
R