Gong SUP 1 SASU Guide De L'utilisateur page 45

∙ Connection to the chicken loop
❶ - First check that your chicken loop release is working properly and that you are able to trigger it and reset it
even in a difficult situation. Before using your bar for the first time, familiarize yourself with how it works.
To reset your quick release, grab your chicken loop with one hand on
the depower line just above the swivel. Be careful NOT TO LEAN ON
THE RED RING. Then with the second hand, replace the loop in the
quick release socket and press firmly until it snaps back into place
automatically. To facilitate handling, carefully respect the position of
the diagram : chicken loop upwards.
HOW TO : Reset your chicken loop
on the FeelX kite bar
❷
- Connect your kite leash to
the chicken loop safety ring.
❸
- Connect the chicken loop to
the hook on your harness,
taking care to position
the chicken loop finger
correctly..
GOOD TO KNOW :
䗂 The Chicken Loop Finger secures your chicken
loop to your harness hook. In the event of line
slack, it prevents the bar from separating from
the harness hook.
Refer to the following diagram for the use of the
Chicken Loop Finger:
Tchoutch
45
GONG-GALAXY.COM