Gong SUP 1 SASU Guide De L'utilisateur page 38

Kite range
→ Use of the kite
䗂 All the information provided is intended as advice and recommendations only. It is
not a substitute for full and proper training by qualified instructors.
∙ Placement of glass fiber battens (Strutless, Strutless Revo)
For Strutless and Strutless Revo models, you have to place the fiber battens before inflation.
The Strutless has 3 battens and the Strutless Revo has a single batten. For maximum performance,
we recommend using all the provided battens, whatever the conditions.
❶ - Unfold the kite downwind, on a clean, debris free surface with no sharp or abrasive edges,
extrados on the ground. Place sand or sufficient weight on the windward tip to secure it.
❷ - Insert the fiber batten in its sheath through the openings provided on the trailing edge.
Close the sheaths with Velcro as shown below:
⚠ WARNING ⚠
38
EN