Philips Respironics System One Manuel D'utilisation page 9

Connecting the Therapy Device
1. When using a humidifier, attach the patient circuit to the air outlet port.
2. To connect the therapy device to the humidifier, remove the side cover on the therapy device.
Press in the tab on the side cover and pull the cover away from the unit.
Note: Therapy device shown is an example. Actual therapy device may vary.
3. Next, line up the components side by side. Make sure that the guides on the humidifier fit into
the slots on the therapy device, and the air outlet port on the therapy device fits into the air
inlet port on the humidifier.
Therapy Device
4. While holding both the therapy device and the humidifier, pull the release latch (on the
bottom of the humidifier) and press the two units together until they snap into place. Let
go of the release latch. Make sure that the therapy device and the humidifier are com-
pletely seated against each other.
Side Cover
Air Outlet Port
Guides
Slots
Release Latch
Therapy Device
Tab
Air Inlet Port
Humidifier
(bottom view)
Release Latch
Humidi er
7